For most tile and linoleum floors, a solution of 25% Challenger and 75% water will work well. If floors are waxed, test the dilution to make sure it is not removing the wax. If you want to remove the wax, use a stronger solution, then rinse.

Spray Challenger full strength. Allow to penetrate for 1 to 2 minutes. Rinse with warm water.

Wash walls with a solution of 10% Challenger and 90% water. Also excellent as a wall wash before painting. No rinsing necessary. Very greasy walls, such as restaurant kitchens, require a strong mixture such as 50% Challenger and 50% water or maybe stronger. Always test Challenger on painted walls before using.

If desks and chairs are extremely dirty, use a solution of 50% Challenger and 50% water, then rinse with water. For maintenance, a solution of 1 ounce Challenger to 15 ounces water. Not necessary to rinse.

If used on wood, use a mild solution of 20% Challenger and 80% water and apply with a soft cloth. Rinse surface with clean, damp cloth. Always test Challenger on wood before using.

Use 10% Challenger and 90% water. Do not rinse.

Use full strength on concrete. Allow Challenger to work for 5-10 minutes. Flush with a pressure washer or hose.

Spray full strength directly on surface. Allow Challenger to work for 1 to 2 minutes. Rinse with warm or cold water.

Spray with 50% Challenger and 50% water. Use a sponge and rinse with water. Test Challenger on carpeting before using.

Use full strength on driveways and sidewalks. Allow Challenger to work for 5-10 minutes. Flush with a pressure washer or hose, with warm or hot water.

Spray the siding with 25% Challenger and 75% water. Rinse with water using a pressure washer or hose. Test Challenger on siding before applying.

Spray the furniture with a 50% mixture of Challenger and 50% water. Rinse with water by hand or hose.

Spray Challenger full strength or dilute to 75% Challenger and water. Rinse with water using a pressure washer or hose.

Spray with 50% Challenger and 50% water. Flush with water.

Exterior Surfaces: 25% Challenger and 75% water. Flush with water. Engines: Use full strength. Allow Challenger to work for 10-15 minutes, then flush with water.

Use full strength on concrete. Allow Challenger to work for 5-10 minutes. Flush with a pressure washer or hose.

Apply Challenger straight and allow Challenger to work for 10 minutes. Then flush with hot water using a pressure washer. If filters are extremely greasy, spray Challenger on filters and then place in a plastic bag for 1 hour before flushing with water.